#!/usr/bin/ruby

# -------------------------------------------------------------------------- #
# Copyright 2002-2025, OpenNebula Project, OpenNebula Systems                #
#                                                                            #
# Licensed under the Apache License, Version 2.0 (the "License"); you may    #
# not use this file except in compliance with the License. You may obtain    #
# a copy of the License at                                                   #
#                                                                            #
# http://www.apache.org/licenses/LICENSE-2.0                                 #
#                                                                            #
# Unless required by applicable law or agreed to in writing, software        #
# distributed under the License is distributed on an "AS IS" BASIS,          #
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
# See the License for the specific language governing permissions and        #
# limitations under the License.                                             #
#--------------------------------------------------------------------------- #

ONE_LOCATION = ENV['ONE_LOCATION']

if !ONE_LOCATION
    RUBY_LIB_LOCATION = '/usr/lib/one/ruby'
    GEMS_LOCATION     = '/usr/share/one/gems'
    REMOTES_LOCATION  = '/var/lib/one/remotes/'
else
    RUBY_LIB_LOCATION = ONE_LOCATION + '/lib/ruby'
    GEMS_LOCATION     = ONE_LOCATION + '/share/gems'
    REMOTES_LOCATION  = ONE_LOCATION + '/var/remotes/'
end

# %%RUBYGEMS_SETUP_BEGIN%%
require 'load_opennebula_paths'
# %%RUBYGEMS_SETUP_END%%

$LOAD_PATH << RUBY_LIB_LOCATION
$LOAD_PATH << RUBY_LIB_LOCATION + '/cli'

require 'command_parser'
require 'one_helper/onehost_helper'
require 'one_helper/onecluster_helper'

CommandParser::CmdParser.new(ARGV) do
    usage '`onehost` <command> [<args>] [<options>]'
    version OpenNebulaHelper::ONE_VERSION

    helper = OneHostHelper.new

    before_proc do
        helper.set_client(options)
    end

    ########################################################################
    # Global Options
    ########################################################################
    cmd_options = CommandParser::OPTIONS - [CommandParser::VERBOSE]
    set :option, cmd_options + OpenNebulaHelper::CLIENT_OPTIONS

    IM = {
        :name => 'im',
        :short => '-i im_mad',
        :large => '--im im_mad',
        :description => 'Set the information driver for the host',
        :format => String
    }

    VMM = {
        :name => 'vm',
        :short => '-v vmm_mad',
        :large => '--vm vmm_mad',
        :description => 'Set the virtualization driver for the host',
        :format => String
    }

    FORCE = {
        :name => 'force',
        :large => '--force',
        :description => 'Force probe upgrade in onehost sync'
    }

    SSH = {
        :name => 'ssh',
        :large => '--ssh',
        :description => 'Use SSH to synchronize remotes. In case some '\
                        'probes are no longer in the fronted they will be '\
                        'deleted in the hosts.'
    }

    IPV4 = {
        :name  => 'ipv4',
        :large => '--ipv4 ip1,ip2',
        :description => 'Comma separated IPV4 to set',
        :format => Array
    }

    IPV6 = {
        :name  => 'ipv6',
        :large => '--ipv6 ip1,ip2',
        :description => 'Comma separated IPV6 to set',
        :format => Array
    }

    CREAT_OPTIONS = [IM, VMM, OneClusterHelper::CLUSTER]
    SYNC_OPTIONS  = [OneClusterHelper::CLUSTER, FORCE, SSH]

    ########################################################################
    # Monitoring PLOT options
    ########################################################################
    START_T = {
        :name => 'start',
        :large => '--start date',
        :description => 'Start date to show data',
        :format => String
    }

    END_T = {
        :name => 'end',
        :large => '--end date',
        :description => 'End date to show data',
        :format => String
    }

    UNIT = {
        :name => 'unit',
        :large => '--unit unit',
        :description => 'Unit to format data',
        :format => String
    }

    TABLE = {
        :name => 'table',
        :large => '--table',
        :description => 'Show monitoring information in table format'
    }

    N_ELEMS = {
        :name => 'n_elems',
        :large => '--n elements',
        :description => 'Number of records to show',
        :format => Integer
    }

    CSV_WITH_SEP = {
        :name => 'csv',
        :large => '--csv separator',
        :description => 'Show data in CSV format',
        :format => String
    }

    PLOT_OPTS = [START_T, END_T, UNIT, TABLE, N_ELEMS, CSV_WITH_SEP]

    ########################################################################
    # Formatters for arguments
    ########################################################################

    set :format, :hostid, OneHostHelper.to_id_desc do |arg|
        helper.to_id(arg)
    end

    set :format, :hostid_list, OneHostHelper.list_to_id_desc do |arg|
        helper.list_to_id(arg)
    end

    ########################################################################
    # Commands
    ########################################################################

    create_desc = <<-EOT.unindent
        Creates a new Host
    EOT

    command :create, create_desc, :hostname,
            [:file, nil], :options => CREAT_OPTIONS do
        if options[:im].nil? || options[:vm].nil?
            STDERR.puts 'Drivers are mandatory to create a host:'
            STDERR.puts "\t -i information driver"
            STDERR.puts "\t -v hypervisor driver"
            exit(-1)
        end

        cid = options[:cluster] || ClusterPool::NONE_CLUSTER_ID
        helper.create_resource(options) do |host|
            rc = host.allocate(args[0], options[:im], options[:vm], cid)

            if !OpenNebula.is_error?(rc) && !options[:type].nil?
                host.update(str, true)
            end

            rc
        end
    end

    delete_desc = <<-EOT.unindent
        Deletes the given Host
    EOT

    command :delete, delete_desc, [:range, :hostid_list] do
        helper.perform_actions(args[0], options, 'deleted') do |host|
            host.delete
        end
    end

    enable_desc = <<-EOT.unindent
        Enables the given host, fully operational
    EOT

    command :enable, enable_desc, [:range, :hostid_list] do
        helper.perform_actions(args[0], options, 'enabled') do |host|
            host.enable
        end
    end

    disable_desc = <<-EOT.unindent
        Disables the given host:
          - monitor: enabled
          - scheduler deployment: disabled
          - manual deployment: enabled
    EOT

    command :disable, disable_desc, [:range, :hostid_list] do
        helper.perform_actions(args[0], options, 'disabled') do |host|
            host.disable
        end
    end

    offline_desc = <<-EOT.unindent
        Sets the host offline:
          - monitor: disabled
          - scheduler deployment: disabled
          - manual deployment: disabled
    EOT

    command :offline, offline_desc, [:range, :hostid_list] do
        helper.perform_actions(args[0], options, 'offline') do |host|
            host.offline
        end
    end

    update_desc = <<-EOT.unindent
        Update the template contents. If a path is not provided the editor will
        be launched to modify the current content.
    EOT

    command :update, update_desc, :hostid, [:file, nil],
            :options => OpenNebulaHelper::APPEND do
        helper.perform_action(args[0], options, 'updated') do |obj|
            if options[:append]
                str = OpenNebulaHelper.append_template(args[0], obj, args[1])
            else
                str = OpenNebulaHelper.update_template(args[0], obj, args[1])
            end

            helper.set_client(options)
            obj = helper.retrieve_resource(obj.id)

            obj.update(str, options[:append])
        end
    end

    sync_desc = <<-EOT.unindent
        Synchronizes probes in /var/lib/one/remotes ($ONE_LOCATION/var/remotes
        in self-contained installations) with Hosts.
        Examples:
            onehost sync
            onehost sync -c myCluster
            onehost sync host01,host02,host03
    EOT

    command :sync, sync_desc, [:range, :hostid_list, nil],
            :options => SYNC_OPTIONS do
        helper.sync(args[0], options)
    end

    list_desc = <<-EOT.unindent
        Lists Hosts in the pool. #{OneHostHelper.list_layout_help}
    EOT

    command :list, list_desc,
            :options => CLIHelper::OPTIONS + OpenNebulaHelper::OPTIONS +
                        [OpenNebulaHelper::DESCRIBE] do
        helper.list_pool(options)
    end

    show_desc = <<-EOT.unindent
        Shows information for the given Host
    EOT

    command :show, show_desc, :hostid,
            :options => [OpenNebulaHelper::FORMAT, OpenNebulaHelper::DECRYPT] do
        helper.show_resource(args[0], options)
    end

    top_desc = <<-EOT.unindent
        Lists Hosts continuously
    EOT

    command :top, top_desc,
            :options => CLIHelper::OPTIONS + OpenNebulaHelper::OPTIONS do
        helper.list_pool(options, true)
    end

    flush_desc = <<-EOT.unindent
        Disables the host and reschedules all the running VMs in it.
    EOT

    command :flush, flush_desc, [:range, :hostid_list] do
        begin
            if !ONE_LOCATION
                action = YAML.load_file('/etc/one/cli/onehost.yaml')
            else
                action = YAML.load_file("#{ONE_LOCATION}/etc/cli/onehost.yaml")
            end
            action = action[:default_actions][0][:flush]
        rescue StandardError => e
            STDERR.puts e
        end
        helper.perform_actions(args[0], options, 'flushing') do |host|
            host.flush action
        end
    end

    rename_desc = <<-EOT.unindent
        Renames the Host
    EOT

    command :rename, rename_desc, :hostid, :name do
        helper.perform_action(args[0], options, 'renamed') do |o|
            o.rename(args[1])
        end
    end

    forceupdate_desc = <<-EOT.unindent
        Forces host monitoring update
        Examples:
            onehost forceupdate host01
            onehost forceupdate host01,host02,host03
            onehost forceupdate -c myCluster
    EOT

    command :forceupdate, forceupdate_desc, [:range, :hostid_list, nil],
            :options => [OneClusterHelper::CLUSTER] do
        helper.forceupdate(args[0], options)
    end

    monitoring_desc = <<-EOT.unindent
        Show monitoring metrics in a graphic
    EOT

    command :monitoring,
            monitoring_desc,
            :hostid,
            :attr,
            :options => PLOT_OPTS do
        helper.perform_action(args[0], options, 'monitoring') do |host|
            rc = host.info

            if OpenNebula.is_error?(rc)
                STDERR.puts rc.message
                exit(-1)
            end

            helper.monitoring(host, args[1], options)
        end
    end
end
